Using Coffee Beans - Siemens TK 58 series Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
en
de
Reset
The settings for water hardness, tempera­
ture and default time in "eco" mode can be
reset to the factory settings simultaneously.
Switch the appliance to "eco" mode and
remove trays 1 and .
4
Hold down the
and
neously for at least 5 seconds. The LEDs
flash briefly to confirm the reset.
Insert trays 1 and  again, the
appliance switches to "eco" mode.
Adjusting the grinding unit
Sliding switch 17 adjusts the degree of
grinding, from coarse to fine.
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged.
● Press the coffee dispensing button
● While the grinding unit is running, move
the sliding switch 17 to the desired
position: the smaller the dots, the finer the
grind.
i
The new setting will not become apparent
until the second or third cup is brewed.
Tip: For dark roast coffee beans, choose a
coarser grind; for light roast beans, select a
finer grind.
Float
The float 3 in the water tray  shows
when the tray needs emptying.
● If the float 3 is clearly visible, empty the
water tray .
16
h
buttons simulta­
4
.
Preparation
This fully automatic espresso/coffee
machine grinds beans freshly for each
brew. If possible, use only beans for fully
automatic coffee and espresso machines.
Deep­freeze or store in a cool place in
sealed, airtight containers. Coffee beans
can be ground while frozen.
Tip: Pre­warm cups, especially small, thick
espresso cups, by placing on the cup shelf
16 or rinsing with hot water.

Using coffee beans

The appliance must be ready for use.
● Set the desired per­cup quantity using
dial .
● Select the desired coffee strength using
5
button
.
● Place the prewarmed cup(s) under the
coffee outlet 10.
● Press the coffee dispensing button
once for 1 cup or twice within three
seconds for 2 cups. The coffee is brewed
and dispensed into the cup(s).
Note
If you select two cups, the grinding and
brewing process is performed twice.
● Coffee dispensing stops automatically
when the selected quantity has been
dispensed.
i
The brewing process can be terminated
by pressing the coffee dispensing button
4
again. When coffee is brewed for
2 cups, it is dispensed via two outlet
nozzles (place the cups side by side).
4

Advertisement

Table of Contents
loading

Table of Contents