en Basic operation
Notes
¡ If you do not change any settings for
approx. 5 seconds, the appliance
will exit settings mode. The settings
will be automatically saved.
¡ With a number of settings your cof-
fee is prepared in several steps.
Wait until the process is fully com-
pleted.
Dispensing a coffee drink
made from fresh beans
Place your pre-warmed cup under
1.
the outlet system.
Press the drinks symbol for a coffee
2.
drink without milk.
a The display will show the drink and
your current settings.
→ "Drink settings", Page 56
Change the settings where neces-
3.
sary:
Use
to adjust the amount.
‒
→ "Adjusting the amount",
Page 57
Use
to adjust the coffee
‒
strength.
→ "Adjusting the coffee strength",
Page 56
Press
.
4.
The coffee beans are freshly ground
for each brewing process.
a The coffee is brewed and then dis-
pensed into the cup.
Tips
¡ You can press
pensing process prematurely.
¡ Find out how to make coffee drinks
with milk.
→ "Dispensing drinks with milk",
Page 54
54
to stop the dis-
Dispensing a coffee drink
made from ground coffee
ATTENTION!
The ground coffee compartment can
become blocked.
▶
Do not use coffee beans.
▶
Do not use instant coffee.
▶
Use a soft brush to gently direct the
ground coffee residue into the shaft.
Note
When using ground coffee, the
following selections are not available:
¡ Two cups at once
¡ Coffee strength
¡ "doubleshot"
Place your pre-warmed cup under
1.
the outlet system.
Press the symbol for your desired
2.
drink.
Press
repeatedly until the display
3.
shows "Gr. coffee".
Open the ground coffee compart-
4.
ment.
Add a maximum of 2 level tea-
5.
spoons of ground coffee, max. 12 g.
Close the ground coffee compart-
6.
ment.
Press
.
7.
a The coffee is brewed and then dis-
pensed into the cup.
Tips
¡ You can press
pensing process prematurely.
¡ If you would like another drink with
ground coffee, repeat the process.
¡ Always add the ground coffee just
before making the drink.
Dispensing drinks with milk
You can use your appliance to dis-
pense coffee drinks with milk and milk
froth.
to stop the dis-