Programmed Copy Jobs; To Store A Copy Program - Konica Minolta bizhub 180 User Manual

6.7 Programmed Copy Jobs

6.7 Programmed Copy Jobs
Store up to two of the more frequently used copy setting programs for immediate
recall when necessary.
Note
Copy programs cannot be stored while the machine is warming up or while a
copy job is paused (Interrupt mode).

To store a copy program

1
Select the copy settings to be stored as the copy program.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
❍ The zoom ratio can be set between × 0.50 and × 2.00.
2
Press the [Copy Program] key.
3
Using the and
"REGIST.", and then press the [Yes]
key.
4
Using the and
the program number where you wish
to store the copy program, and then
press the [Yes] key.
bizhub 180
keys, select
keys, select
6
6-21