QUANTA QSSC-S99K 2U User Manual page 71

Chapter 4 — BMC
There are several power control sources implemented in BMC, including Power Button, Watchdog Timer, PEF, and IPMI
chassis command. Below are the diagrams of power control by BMC.
Front Panel Power Button
Chassis Command
Power Off
Front Panel Power Button
Chassis Command
Power On
Reset Support and Reset Source
The BMC asserts the System Reset signal on the baseboard to perform a system reset.
There are several power control sources implemented in BMC, including Watchdog Timer, PEF, and IPMI chassis command.
Power Management (Node Management)
Intel NM support will be provided to support power management.
Sensor Name
SPS FW Health
NM Health
NM Exception
NM Threshold
NM Capabilities
Please Refer Node Manager IPMI Function to Intel® Dynamic Power Node Manager 1.5.[3]
DCMI 1.0 support
All DCMI 1.0 mandatory requirements will be supported.
Please Refer it to Data Center Manageability Interface Specification V1.0, Revision 1.0.[4]
BMC
BMC
Sensor Number
17h
19h
18h
1Bh
1Ah
63
South Bridge Power Off State
South Bridge Power On State
Sensor Type
DCh – OEM
DCh – OEM
DCh – OEM
DCh – OEM
DCh – OEM
SDR Type
03
03
03
03
02