Network Connection Cable; Usb Adapter (A-Type Connector To B-Type Connector) - Silvercrest NTK-2100 User Manual And Service Information

Network Connection Cable

Use
- For connecting a computer to a network, 100 MBit
- Length: approx. 130 cm
To be able to connect your computer to a network you must first have an integrated network card. This provides a
port where the 8-pin modular jack of the network connection cable can be inserted. If you are not sure whether your
computer already has this network port, please refer to the technical documentation of your computer.
Pull both connectors simultaneously to make the cable the required length. Please see winding mechanism notes
on page 4.
Insert either end of the connection cable into the network port of the computer and connect the other end of the
network connection cable to a switch (or network hub).
!
Please note that although the modem connection cable (page 6) is very similar in type, it has however a 6-
pin modular jack, model "RJ11".

USB Adapter (A-type Connector to B-type Connector)

Use
- To adapt a USB cable for use with various types of connectors
A-type connector
B-type connector
Fig.: 8-pin modular jack of the
network connection cable,
model: RJ45
7