Package Contents; Introduction And Getting Started - Silvercrest NTK-2100 User Manual And Service Information

Package Contents

Introduction and Getting Started

Connecting USB Devices to the Computer
USB are the initials of "Universal Serial Bus". When you connect a USB device to your computer, it is detected and
configured automatically by the system. If your computer has several USB ports available, you can use any of the
ports. Some desktop computers may have USB ports to the rear for the more long-term connections and further
USB ports at the front for connections that change often.
It is not possible to confuse the ports. If a USB device is connected to another USB port, the operating system will
install the driver again if necessary and the device will be ready for use.
Procedure
Plug the USB connector of the device into a USB port on your computer. You will immediately be prompted by this
message that appears on the lower-right of your screen:
1 Headset
2 USB extension cable
3 Modem connection cable, RJ11
4 Network connection cable, 100 MBit, RJ45
5 USB adapter
(A-type connector to B-type connector)
6 USB adapter
(A-type connector to mini-USB connector)
7 USB mouse
8 USB hub 2040x
9 Numeric keypad
(Fig.: Example by means of the
USB mouse of the
Notebook-Traveller-Kit)
3