Headset - Silvercrest NTK-2100 User Manual And Service Information

~ 1cm

Headset

Use
- Telephony through the computer
- Length: approx. 130 cm
Microphone
To connect the headset to your computer a sound card must be installed on your computer. This offers connection
possibilities for an external microphone as well as headphones. Usually the connection ports are marked either by
colors or with printed symbols to differentiate them. Simultaneously pull on the microphone and the connector to
make the cable the required length. Please see winding mechanism notes on page 4.
The red jack of the headset connects to the microphone port on the computer and the green jack connects to the
headphone port on the computer. Your computer may offer further audio jacks. If you are not sure which is the
correct connector port on your computer, please refer to the User manual of your computer.
~ 1cm
To headphone
connector on PC
(green)
Microphone connector
(red)
Gently pull until it
unlocks and the cable
winds back in.
Earpiece
5