Alcatel Speed Touch Home User Manual page 66

7 Speed Touch Home Local Configuration
Automatic Software
Upgrade
66 / 86
The 'Upgrade' web page contains the following fields:
Active Software Version
"
Indicates the software version that the Speed Touch Home is
currently using.
Passive Software Version
"
Indicates the software version resident in the STHome, but not
used. This could be a newer version which is yet to be switched
to active, but also a dormant older version.
Software Path Field
"
Allows you to specify the path to the STHome software upgrade
package to be uploaded. You can also browse to it, using the
The header frame contains the following command buttons:
Starts the upload process: the software package
"
indicated by the 'Software Path' will be transferred to the
STHome to become the passive software version.
Note: Prior to start an upload:
A software package must be located in the 'Software Path'
D
field
The 'Passive Software Version' field must be empty. To clear
D
the 'Passive Software Version' field, click
"
STHome.
Switches active and passive software versions after
"
a successful upload. Your STHome will reboot and come online
again with the new version.
The STHome supports another software upgrade possibility: A new
version of the software can be downloaded from the ADSL network
to your STHome.
This feature is controlled by the ADSL provider. At some point in time
he might decide to upgrade the software in your STHome. This
download will happen almost unnoticed. However, you will be able
to see a change in the software version if you browse to the
STHome's 'Upgrade' page.
button.
Remove the passive software version from the
3EC 17058 AAAA TCZZA Ed. 03
.