Figure 8 Multiple Pc Configuration - Alcatel Speed Touch Home User Manual

CAUTION
3EC 17058 AAAA TCZZA Ed. 03
Connected to a workgroup hub.
"
Use a crossover LAN cable to connect the Ethernet port
a MDI X Ethernet port of your hub.
Use straight through LAN cables to make the connections
between the MDI X hub ports and the PC's or workstation's MDI
Ethernet ports.
MDI X
Ethernet
crossover cable
Figure 8 Multiple PC Configuration
10Base T Half Duplex Interfacing
Make sure the 10Base T port(s) of your PC(s) are configured for either
Auto Negotiation or Half Duplex.
Never configure the PC NIC 10Base T Ports for Full Duplex !
Assuming the Speed Touch Home and the PC or hub are properly
powered on, the Link Integrity LEDs on both PC and/or hub ports and
STHome should be continuously green.
This indicates that the link is properly connected. If not, check the
cable layouts according to Appendix A.
3 Connecting the Speed Touch Home
MDI
straight cable
MDI X MDI
straight cable
MDI X
MDI
straight cable
MDI
straight cable
adsl 0531/ 03
1 to
19 / 86