Icom IC-M801GMDSS Instruction Manual page 55

D D Initial set mode items (continued)
Modulation input/output selection
This item selects the input/output terminal for signals
to/from an external unit, such as a TNC (Terminal
Node Controller).
ACC out
This item toggles signal output from [AF/MOD] (pins
6–8; KEY, 13.6 V and ALC signals) ON and OFF.
• OFF : No signal is output from pins 6–8 of
[AF/MOD]. (default)
• ON : KEY, 13.6 V and ALC signals are output
from pins 6–8, respectively.
Position indication type
Select the position indicating type from simple and de-
tail.
• SIMPLE : Hides second digits (default)
• DETAIL : Shows second digits
Offset time
Set the offset time between the UTC and local time
within –12:00 to +12:00 in 10 minutes steps.
Automatic print out
This item turns the automatic print out function ON
and OFF when receiving a DSC call.
• OFF : Prints out the received DSC contents
manually.
• ON : Prints out the received DSC contents
automatically. (default)
Automatic acknowledgement
This item turns the automatic acknkowledgement
function ON and OFF when receiving a DSC call.
• OFF : Sends back an acknowledgement call
manually.
• ON : Sends back an acknowledgement call
automatically when a DSC call is re-
ceived. (default)
(default: AF/MOD)
(default: 0:00)
SET MODE
* * * S E T M O D E * * *
ÇÇ
A F / M O D
A C C
M I C
I T E M S E L
* * * S E T M O D E * * *
ÇÇ
O F F
O N
I T E M S E L
* * * S E T M O D E * * *
ÇÇ
S I M P L E
D E T A I L
I T E M S E L
* * * S E T M O D E * * *
I T E M S E L
* * * S E T M O D E * * *
O F F
ÇÇ
O N
I T E M S E L
* * * S E T M O D E * * *
O F F
ÇÇ
O N
I T E M S E L
12
12
51