Use of a Locking Clip
Installation of Primo Viaggio 4 . 35 without
base follows the same rules as with base
regarding the availability of different
types of vehicle seat belts.
Important! For different types of seat
belts, please refer to page 16 and on.
Primo Viaggio 4 . 35 should not be installed
on seat types shown on page 23.
B
Should your vehicle belt need a locking
clip, a standard one can be purchased
in specialized retailers or through Peg
A
Perego Customer Service.
To install the locking clip, hold the
shoulder strap and lap belt together just
above the buckle. Unbuckle the belt while
holding the straps. Hook the locking clip
around both straps as shown.
Leave 1,3 cm (1/2 inch) space between the
clip and latch. Re-buckle the belt.
- 36 -