General Information; Bluetooth Setup; Telephone Setup - Ford Galaxy Owner's Manual

GENERAL INFORMATION

CAUTION
Using the system with the engine off
will drain the battery.
This section describes the functions and
features of the Bluetooth cell phone hands
free system.
The Bluetooth cell phone part of the
system provides interaction with the audio
or navigation system and your cell phone.
It allows you to use the audio or navigation
system to make and receive calls without
having to hold your cell phone.
Compatibility of phones
CAUTION
As no common agreement exists, cell
phone manufacturers are able to
implement a variety of profiles in their
Bluetooth devices. Because of this, an
incompatibility can occur between the
phone and hands-free system, which in
some cases may significantly degrade the
system performance. To avoid this
situation, only recommended phones
should be used.
Please visit the website www.ford-
mobile-connectivity.com for full details.

BLUETOOTH SETUP

Before you can use your telephone with
your vehicle it must be bonded to the
vehicle telephone system.
Handling of phones
Up to six Bluetooth devices can be bonded
to the vehicle system.
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Telephone
Note: If there is an ongoing call when the
phone in use is selected as the new active
phone, the call is transferred to the vehicle
audio system.
Note: Even if connected to the car system,
your phone can still be used in the usual
way.
Requirements for Bluetooth
connection
The following are required before a
Bluetooth phone connection can be made.
1. The Bluetooth feature must be
activated on the phone and on the
audio unit. Make sure the Bluetooth
menu option in the audio unit is set to
ON. For information on phone settings,
refer to your phone user guide.
2. In the Bluetooth menu on your phone,
search for Ford Audio and select it.
3. Enter the code number shown on the
vehicle display using the phone keypad.
If no code number is shown on the
display, enter the Bluetooth PIN
number 0000 using the phone keypad.
Now enter the Bluetooth PIN number
shown on the vehicle display.
4. If your cell phone asks you to authorize
the automatic connection, select YES.
Note: A phone call will be disconnected if
the audio unit is switched off. If the ignition
key is turned to the off position the phone
call will remain in progress.

TELEPHONE SETUP

Phonebook
After start up access to the phonebook list
can be delayed for several minutes,
depending upon the size.
293