Wheels And Tires - Ford Galaxy Owner's Manual

A Protective cap
B Pressure relief valve
C Hose
D Orange cap
E Bottle holder
F Pressure gauge
G Power plug with cable
H Compressor switch
I Label
J Bottle lid
K Sealant bottle
1. Open the lid of the tire repair kit.
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing

Wheels and Tires

2. Peel off the label I showing the
3. Take the hose C and the power plug
4. Unscrew the orange cap D and the
5. Screw the sealant bottle K clockwise
6. Remove the valve cap from the
7.
8. Make sure that the compressor switch
9. Insert the power plug G into the cigar
10.
11.
12.
13.
14.
15.
255
maximum permissible speed of
80 km/h (50 mph) from the casing and
attach it to the instrument panel in the
driver s field of view. Make sure the
label does not obscure anything
important.
with cable G out of the kit.
bottle lid J.
into the bottle holder E fully tight.
damaged tire.
Detach the protective cap A from the
hose C and screw the hose C firmly
onto the valve of the damaged tire.
H is in position 0.
lighter socket or auxiliary power socket.
See Cigar Lighter (page 138). See
Auxiliary Power Points (page 138).
Start the engine.
Move the compressor switch H to
position 1.
Inflate the tire for no longer than
seven minutes to an inflation pressure
of minimum 1.8 bar (26 psi) and a
maximum of 3.5 bar (51 psi). Move
the compressor switch H to position
0 and check the current tire pressure
with pressure gauge F.
Remove the power plug G from the
cigar lighter socket or auxiliary power
socket.
Quickly unscrew the hose C from the
tire valve and replace the protective
cap A. Fasten the valve cap again.
Leave the sealant bottle K in the
bottle holder E.