Using The Osd Menu For The Screen; Selecting Server Channels - Black Box KVTA170UK-16 User Manual

5.2.2 Using the OSD menu for the screen

Press the button to display the OSD menu for the screen:
The various sections within the screen menu are as follows:

5.2.3 Selecting server channels

In operation, you can select server channels in two main ways, including:
• On-screen menu (this is different to the OSD for the screen), or
• Keyboard hotkeys.
For more information, please refer to the Operation section of the appropriate Black Box user guide as appropriate to the rack tray
model being used:
• KVTA170UK-16 ---> use ServSwitch CX Uno user guide (KV0081A/KV0161A),
• KVTA171UK-16 ---> use ServSwitch CX Uno IP user guide (KV1081A/KV1161A),
---> use ServSwitch CX Quad IP user guide (KV4161A).
• KVTA174UK-16
The label above the keyboard provides useful reminders about how to select the on-screen menu and server channels:
Image
Controls for brightness, contrast, colour temp, red, green and blue.
Geometry
Controls for auto adjust, H position, V position, phase and clock.
Not used
Not used
Misc
Controls for language, OSD position, graphic mode, OSD time, ratio, reset and timer.
724-746-5500 | blackbox.com
Chapter 5: Operation
S e r v V i e w C X T r a y
B L A C K B O X R A C K T R A Y K V M S W I T C H
Page 19