Connecting The Rack Tray; The External Link (Network Or Remote User) - Black Box KVTA170UK-16 User Manual

ServView CX Rack Tray

3.3 Connecting the rack tray

All server, network and power connections are located at the rear of the unit.

3.3.1 The EXTernal link (network or remote user)

The single RJ-45 socket labeled as EXT is used to allow either global or remote users to login and control connected servers. The
EXT port provides one of the following links (dependant on the model of rack tray):
• An ethernet network link, labeled
or
• A remote extender link (to attach a ServSwitch CX Remote USB), labeled
3.3.1.1 Connecting the external link
1 Wherever possible, ensure that power is disconnected from the rack tray.
2 Connect a CAT 5, 5e or 6 link cable to the port labeled EXT. See Figure 3-4.
Link cable from either a net-
work connection or a remote
extender
3 Connect the other end of the cable as follows:
• If the EXT port label shows
• If the EXT port label shows
Page 12
,
Figure 3-4. Connecting a CAT 5, 5e or 6 link cable to the EXT port.
connect the link cable to a network switch/router.
KVM
connect the link cable to a Black Box ServSwitch CX Remote USB extender.
only
724-746-5500 | blackbox.com
KVM . Note: This port is NOT a network port.
only
E X
T