Related Manuals for Black Box KVT217A
Summary of Contents for Black Box KVT217A
- Page 1 © Copyright 2006. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...
- Page 2 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) SUPPORT FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
- Page 4 FCC AND RFI STATEMENTS FEDERAL COMMUNICATIONS COMMISSION INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is...
- Page 5 SERVVIEW KVM DRAWER (2U) WITH 17" OR 19" LCD NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
- Page 6 NOM STATEMENT 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
- Page 7 SERVVIEW KVM DRAWER (2U) WITH 17" OR 19" LCD TRADEMARKS USED IN THIS MANUAL BLACK BOX and the Double Diamond logo are registered trademarks, and ServView is a trademark, of BB Technologies, Inc. PS/2 is a registered trademark of International Business Machines Corporation.
- Page 8 CAUTION NOTICES CAUTION Unplug the ServView™ KVM Drawer (2U) with 17" or 19" LCD from the power outlet before cleaning. Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a neutral detergent (for example, clean water), squeeze it tightly, then clean the screen lightly with it.
-
Page 9: Table Of Contents
3.1.2 Auto Adjust ..................11 3.1.3 Phase/Clock..................11 3.1.4 H/V Position..................11 3.1.5 Misc....................12 3.1.6 Reset ....................12 3.2 Resolution Settings..................13 3.2.1 Microsoft Windows ................13 3.2.2 Sun Servers..................13 3.2.3 Common Desktop Environment (CDE)........14 Appendix. Troubleshooting..................15 A.1 Calling Black Box ..................15 A.2 Shipping and Packaging ................15... -
Page 10: Specifications
Connector: Video input: (1) HD15 Power: 12-VDC adapter, VESA DPMS power management Size: KVT217A: 3.5"H x 17.3"W x 17.3"D (8.9 x 43.9 x 43.9 cm); KVT219A: 3.5"H x 17.4"W x 18.9"D (8.9 x 44.2 x 48 cm) Weight: KVT217A: 29.7 lb. (13.5 kg); KVT219A: 31.9 lb. (14.5 kg) -
Page 11: Overview
It features a flip-up design, adjustable brackets, and a built-in on-screen display (OSD) to adjust display settings. Two models are available: a 17" LCD screen (KVT217A) and a 19" LCD screen (KVT219A). The monitor’s unique flip-up design allows viewing through the cabinet’s closed glass door. -
Page 12: Hardware Description
CHAPTER 2: Overview 2.3 Hardware Description Figure 2-1 shows the KVM drawer’s components. Table 2-1 describes these components. ➅ ➃ ➄ ➂ ➆ ➀ ➈ ➁ ➇ Figure 2-1. The ServView KVM Drawer assembly. Table 2-1. The ServView KVM Drawer’s components. Number Component ➀... -
Page 13: Lcd Osd Menu Operation
SERVVIEW KVM DRAWER (2U) WITH 17" OR 19" LCD 3. LCD OSD Menu Operation 3.1 LCD and Main Menu Figure 3-1. LCD front panel and main menu. The LCD membrane (shown in Figure 3-1 and located on the LCD monitor’s bottom front center) is a thin plastic sheet that has buttons for Power, Menu/ Selection, Left, Right, and Exit. -
Page 14: Bright/Contrast
CHAPTER 3: LCD OSD Menu Operation 3.1.1 B RIGHT ONTRAST Select this option to enter the Bright and Contrast submenus. 1. Bright To adjust the RGB input signal’s brightness, use the Left, Right, and Menu/Selection buttons. 2. Contrast To adjust the input signal’s contrast level, use the Left, Right, and Menu/Selection buttons. -
Page 15: Misc
SERVVIEW KVM DRAWER (2U) WITH 17" OR 19" LCD 3.1.5 M This option takes you to the Misc submenus. These are described below. 1. Information The first header row shows the current resolution setup. The second header row shows the current input signal’s horizontal frequency. The third header row shows the current input signal’s vertical frequency. -
Page 16: Resolution Settings
CHAPTER 3: LCD OSD Menu Operation 3.2 Resolution Settings Sections 3.2.1 through 3.2.3 describe how to set the resolution for Microsoft ® Windows , Sun, or Common Desktop Environment (CDE). ® 3.2.1 M ICROSOFT INDOWS Follow the steps listed below to select Microsoft Windows resolution settings. 1. -
Page 17: Common Desktop Environment (Cde)
SERVVIEW KVM DRAWER (2U) WITH 17" OR 19" LCD 4. Next, type: pkill Xsun 5. Finally, to restart the Xsession, type: pkill Xsession 6. Restart the server. 3.2.3 C (CDE) OMMON ESKTOP NVIRONMENT To change the resolution, type setenv output-device screen:r1024x768x70 at the OK prompt. -
Page 18: Appendix. Troubleshooting
• If you are shipping the ServView KVM Drawer (2U) with 17" or 19" LCD for repair, make sure you include everything that came in the original package. Before you ship, contact Black Box to get a Return Authorization (RA) number.