ServView 17 Enterprise KVM Drawer CONTENTS Chapter 1 Getting Started 1.1 Important Safeguards 1.2 Regulatory Notice 1.3 Package Contents 1.4 Before Installation 1.5 Unpacking 1.6 Peripheral Products 1.7 Structure Diagram 1.8 How to use the LCD Keyboard Drawer 1.9 How to use the Slides 1.10 How to use “One Man”...
ServView 17 Enterprise KVM Drawer 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does NOT cover ■ Any product, on which the serial number has been defaced, modified or removed. ■...
ServView 17 Enterprise KVM Drawer 1.2 Regulatory Notice Legal Information Information in this document has been carefully checked for accuracy; however, no guaran- tee is given to the correctness of the contents. The information in this document is subject to change without notice.
ServView 17 Enterprise KVM Drawer 1.4 Before Installation ■ It is very important to locate the LCD Keyboard Drawer in a suitable environment. ■ The surface for locating and fixing the LCD Keyboard Drawer should be stable and level ■ Make sure the place has good ventilation, is out of direct sunlight, away from sources of or mounted into a suitable cabinet.
ServView 17 Enterprise KVM Drawer 1.8 How to use the LCD Keyboard Drawer ■ Gently pull the tab toward the front of the LCD shown in Figure 4. Figure 4. Pulling the tab toward the front of the LCD. ■ Flip up the LCD to a suitable angle shown in Figure 5.
ServView 17 Enterprise KVM Drawer 1.9 How to use the slides ■ A white arrow release button is located on the outside of each slide (shown in Figure 7). Figure 7. White arrow button. ■ Push the white arrow button on either side of the LCD keyboard drawer to unlock (shown in Figure 8).
ServView 17 Enterprise KVM Drawer 1.10 How to install “One Man”Installation Slides Package Contents - Supplied attached to unit Mounting bracket (x2) Front mounting ear (left & right) (x2) Support bracket (x4) M6 cage nut (x8) M6 washer (x8) M6* 15mm screws (x8) M3.2*4.5mm screws (x14) Install the Front Mounting Ear (x2) ■...
Page 11
ServView 17 Enterprise KVM Drawer Install into rack ■ Attach the mounting bracket to vertical mounting rails. ■ Adjust the rear mounting bracket to fit your rack. ■ Repeat the above steps for the other side. Caution: Leave the screws slightly loose (not release) ■...
Page 12
ServView 17 Enterprise KVM Drawer Install into rack (cont.) ■ Hold down the white arrow button and push the chassis to the end. ■ Attach left and right mounting ears to vertical mounting rails. ■ Tighten the screws on both sides. ■...
ServView 17 Enterprise KVM Drawer 1.11 Connect to Server via USB Interface KVT151 Series Figure 10. Example of connecting 2-in-1 USB KVM cable to server via USB interface. 1.12 Connect to KVM via USB Interface KVT151 Series Figure 11. Example of connecting 2-in-1 USB KVM cable to KVM via USB interface. ■...
ServView 17 Enterprise KVM Drawer 1.13 Connect to Server via PS/2 Interface KVT151 Series Figure 12. Example of connecting 3-in-1 USB KVM cable to server via PS/2 interface. 1.14 Connect to KVM via PS/2 Interface KVT151 Series Figure 11. Example of connecting 3-in-1 PS/2 KVM cable to KVM via PS/2 interface. ■...
ServView 17 Enterprise KVM Drawer 2.1 On-screen Display Operation 17” LCD membrane Membrane Switch Function Power light Green = On Ornage = Power saving Power on/off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control Exit the OSD screen Shortcut key to auto adjustment by pressing the button for 5 seconds or Toggle analogue, digital &...
ServView 17 Enterprise KVM Drawer 2.2 On-screen Menu Brightness/Contrast Brightness: Adjust background black level of the screen image Contrast: Adjust the difference between the image background (black level) and the foreground (white level). Auto Adjust Auto Adjust: Fine tune the video signal to eliminate waviness and distortion. An “Adjusting” message is displayed during the process.
ServView 17 Enterprise KVM Drawer 4.0 Dimensions Product Dimensions Packing Dimensions Model Net Weight Gross Weight (W x D x H) (W x D x H) 442 x 650 x 44mm 589 x 856 x 168mm 16 kg 22 kg KVT151AE-UK 17.4 x 25.6 x 1.73”...