Pioneer AVIC-N2 Service Manual page 231

5
- Remocon touch panel test
• How to operate the touch panel test mode is described below.
• First, "1. Setup touch-panel effective range" in the touch panel test menu is made.
• Next, "3. Test Touch-panel", and if the result is OK, then EXIT the screen.
• If the result is NG, conduct "2. Setup calibration", and conduct "3. Test Touch-panel" once again. If the result
is OK, then EXIT the screen.
• Furthermore, details of the misalignment can be verified by the "5. Check Touch-panel compensation".
*) When inspecting the touch panel, use something thin with a round tip such as the touch pen. Furthermore,
do not apply excessive force to the touch panel.
Main Menu
"*" mark shown on the left side of menu item "1" indicates that the setting has been completed. The setting items
where "*" is actually indicated will be "1. Setup ~" and "2. Setup ~" only.
[CR] Enter
[UP/DOWN] Selection of the inspection item
[BACK] Return (to the test mode menu)
1. Setup touch-panel effective range
Adjustment steps
1) Trace the edge of the screen along the monitor resin frame with a round-headed thing to obtain
the coordinates.
2) Press the [BACK] key.
Explanation of the displays
min_x(A,B) : X coordinate of the touch panel • minimum value received
max_x(A,B) : X coordinate of the touch panel • maximum value received
min_y(A,B) : Y coordinate of the touch panel • minimum value received
max_y(A,B) : Y coordinate of the touch panel • maximum value received
5
6
### Remocon / Touch-panel Test
1. Setup touch-panel effective range
*
2. Setup calibration
3. Test Touch-panel
4. Check now calibration condition
5. Check Touch-panel compensation
6. Check Touch-panel graphics
7. Check Touch-panel navi coordinate
[CR]
[JS UP / DOWN]
[BACK]
### Setup touch-panel effective range
The present of the touch-panel effect range (before. after)
min X : ( 37, 36)
max X : (230, 232)
min Y : ( 36, 36)
max Y : (210, 211)
<Caution>
Please trace a white line.
Please move to calibration setup after this setup.
AVIC-N2/XU/UC
6
7
###
Menu selection
Cursor movement
End of test
###
7
8
A
B
C
D
E
F
231
8