Adjustment; Jig Connection Diagram - Pioneer AVIC-N2 Service Manual

1

6. ADJUSTMENT

6.1 JIG CONNECTION DIAGRAM

A
B
C
*1) After connecting the Hideaway Unit, please perform adjustment.
- JIG's List
D
Function
CC Unit (CN609) <--> Main Unit (CN3801)
CC Unit (CN609) <--> GGF1461
CC Unit (CN609) <--> GGF1461
CC Unit (CN608) <--> Monitor PCB (CN4002)
CC Unit (CN2701) <--> Panel PCB (CN5901)
Monitor PCB (CN4002) <--> GGF1483
Monitor Adjustment PCB (*2)
JIG connector Assy (*2)
Monitor PCB ("FOR SERVICE" 14P terminal) <--> GGF1463 (*2)
TEST DISC (Operation check)
*2) Since this product does not have OSD IC, OSD for adjustment is displayed by using GGF1416 and GGF1463
E
at the time of monitor adjustment. As you will find lands for 14 pins with 0.8mm pitch at the left top part of
the monitor board, directly solder a flexible PCB of GGD1323 for adjustment. As GGD1322 is not used, be
careful not to short the terminal.
F
192
1
2
AVIC-N2/XU/UC
2
3
Name Jig No.
PCB GGF1461
40P FFC GGD1170
20P FFC GGD1209
PCB GGF1483
18P FFC GGD1208
36P FFC GGD1366
PCB GGF1416
PCB and FFC GGF1463
14P FFC GGD1323
CD-ROM or DVD-ROM GGV1137
3
4
4