Pioneer AVIC-N2 Service Manual page 229

5
No. Inspection item Outline of inspection
1 Change to Switching of error
display error information display
2 Start within Switching of debug
debug shell shell start
3 Program Switching of program
loading loading
4 GPS GPS assessment system
assessment start
5 File File maintenance
maintenance function
6 Program forced Program forced write
write
5
6
TESTMODE MENU [SERVICE_MENU(THCHNICAL)]
1. Change to display error
2. Start within debug shell
3. Program loading
4. GPS assessment
5. File maintenance
6. Program forced write
<== back page
SYSTEM Ver. : [BOOT] 0.65 [OS] 0.65
Content if inspection
Display setting for error cases. (for debugging)
Message/Information (error information) selectable.
Setting for debug shell start. (for debugging)
Off (no initial start)/On (initial start) selectable.
Recognition method for boot up program write is
changed.
Disc version
(default)
Version upgrade
(for debug)
GPS assessment system can be used. The system will
return to "menu" by BACK key.
File maintenance operations are made. Formatting of
SRAM drive and PC card (ATA Flash Card) are made.
SRAM data is retrieved and copied to PC card. Data
retrieved from SRAM is copied to SRAM from PC card.
Rewriting of SYS (system), GPS (GPS) and APL
(application) software are done by force.
(Joystick is used) The system will return to "menu" by
BACK key.
AVIC-N2/XU/UC
6
7
[Message]
[On]
[Version up]
==> next page
System
program
System data
GPS program
Application
program
System
program
System data
GPS program
Application
program
7
8
Write when the version
No. in the disc is
higher.
Write when the version
No. in the disc is
higher.
Write when the version
No. in the disc is
higher.
Write when the version
information is different
from the one in disc.
Write when the version
No. in disc or card is
higher.
Write when the version
No. in disc or card is
higher.
Write when the version
No. in disc or card is
higher.
Write when the version
No. in disc or card is
higher.
229
8
A
B
C
D
E
F