Pioneer AVIC-N2 Service Manual page 228

1
2. Test mode menu
A
B
No. Inspection item
1 Remocon touch
panel test
2 Version check
C
3 ERROR log
4 Format FLASH drive
D
5 Erase APL-file in
FLASH
6 Clear backup
memory
7 GPS backup data
clear
E
8 GYRO SENSOR
INFO data clear
9 Port status
information
F
228
1
2
TESTMODE MENU [SERVICE_MENU(THCHNICAL)]
1. Remocon touch panel test
2. Version check
3. Error log
4. Format FLASH drive
5. Erase APL-file in FLASH
6. Clear backup memory
7. GPS backup data clear
8. GYRO SENSOR INFO data clear
9. Port status information
==> next page
SYSTEM Ver. : [BOOT] 0.65 [OS] 0.65
Outline of inspection
Remote controller touch
panel inspection
Version information
check
Error history entry
FLASH format
Application file inside
FLASH is clear
Back up variables
initialization
GPS back up data clear
Learned data inside gyro
sensor is clear
Port status display
AVIC-N2/XU/UC
2
3
Content if inspection
Calibration setting and remote controller
inspection are performed.
Display of various version information.
(system software, GPS, system
microprocessor, microprocessor for
mechanism control, microprocessor for
timer).
The screen will return to "menu" by BACK
key.
History of system software errors stored in
SRAM is displayed.
Maximum 8 events from the error last
occurred can be displayed.
The screen will return to "menu" by BACK
key.
FLASH domain used by the system soft is
initialized.
When the job is done, the screen will return
to "menu".
Application file inside FLASH is clear.
*(Except voice data and SRAM backup
variable)
When the job is done, the screen will return
to "menu".
SRAM domain used by the system software
is initialized.
When the job is done, reboot action will be
taken.
SRAM domain used by GPS is initialized.
When the job is done, the screen will return
to "menu".
Learned data inside gyro sensor is cleared.
When the job is done, the screen will return
to "menu".
Port status is displayed. (reverse, parking,
pulse, SDRAM capacity.)
3
4
4