Each Setting And Adjustment; Updating Of The Firmware - Pioneer X-HM20-K Service Manual

5

8. EACH SETTING AND ADJUSTMENT

8.1 UPDATING OF THE FIRMWARE

MCU software
1. Create a "system" folder in USB device.
Note: "system" folder must be written in lower-case letter.
2. Copy the upgrade file (upgrade_Pioneer_108P.bin) and the text file (upgrade.txt) into the "system" folder in USB device.
3. Turn on the main unit and select the USB function.
4. Connect the USB device.
5. FL will display "Upgrade" - indicating upgrading in process.
Caution: During upgrading process, DO NOT CUT THE AC SUPPLY.
6. FL will display "Success" - indicating the upgrading process is completed.
7. After FL display "Success", unplug the power cord from the main unit then only remove the USB device from main unit.
8. Re-plug in the power cord to the main unit and turn on the main unit.
The software upgrade is completed.
To check the software version
1. Press INPUT button to "Line in" function.
2. In "Line in" function,
short press np button once then long press f(PLAY/PAUSE) button until the software version is displayed.
software version display: X-HM20-K/-S → "CD-HM20R Vxxx", X-HM10-K/-S → "CD-HM10R Vxxx"
5
6
X-HM20-K
6
7
7
8
A
B
C
D
E
F
19
8