Accelerator Pedal; Brake Pedal; Park Brake; Brake Master Cylinder - Cushman Titan XD Owner's Manual

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

11. Accelerator Pedal

Accelerator Pedal controls the vehicle speed; with the key
switch ON, the operator seated and the vehicle in F or R
depressing the pedal will cause the vehicle to move.
Releasing the pedal will slow the vehicle and eventually
stop, to stop the vehicle more quickly, depress the brake
pedal.

12. Brake Pedal

Depress the brake pedal to slow or stop the vehicle. The
vehicle is equipped with four wheel hydraulic brakes, disc
on front and drum on rear.

13. Park Brake

The hand operated park brake is located between the
driver and passenger seats. The brake is engaged when
the handle is pointed upward and disengaged when the
handle is parallel to the floor. When leaving the vehicle
unattended, engage the park brake by raising the handle until it is locked in place. To release the park brake push in
on the button at the end of the handle and rotate the handle downward.

14. Brake Master Cylinder

The brake master cylinder is located under the access plate behind the brake pedal. The fluid level must be main-
tained between the MIN and MAX lines on the master cylinder.

15. Cup Holder

A cup holder is located between the driver and passenger seats.

16. Glove Box

Located in the dash panel on the passenger side, the glove
box is large enough to hold the vehicle manual as well as
other items.
17. Run - Tow/Maintenance/Storage Switch
The Run-Tow/Maintenance/Storage Switch is used when
the vehicle has become stalled or inoperative, it is located
behind the access plate in the center of the dash panel.
With switch in TOW/MAINTENANCE/STORAGE position:
• the controller is deactivated
• the electronic braking system is deactivated which
allows the vehicle to be roll freely
• the warning beeper is deactivated
With switch in RUN position:
• the controller is activated
• the electronic braking system and warning beeper
features are activated

18. Fuse Block

The fuse block is used to provide electrical protection to
some of the electrical items and vehicle accessories.
Always replace a blown fuse with the correct size fuse.
INTRODUCTION
12
14
18
17
17
11
13
3
15
16
18
3 - 3