Cushman Titan XD Owner's Manual page 20

GENERAL SPECIFICATIONS
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
2
MODEL: TITAN XD (2 PASSENGER)
TYPE: 48 VOLT ELECTRIC POWERED
INDUSTRIAL BURDEN CARRIER
MODEL YEAR: 2013
Part No:. 618566
Battery Charger:
On-board, Underwriters Laboratories. UL Recognized for US and Canada
z
Input: 100 – 240 Volt, 50/60 Hz, 10/5 amp
Motor:
48 Volt DC shunt wound, brazed armature, solid copper windings. Fan Forced Cooled 17.2 hp (12.8 kW) (Peak)
Drive Train:
Direct motor shaft connected to transaxle pinion shaft
Electrical System:
48 Volt DC, eight, 6 volt deep cycle batteries (115 minute minimum, 225 amp-hour @ 20 hr. discharge rate) in two swing out battery trays
Transaxle:
Differential with helical gears
Brakes:
Front hydraulic disc brakes. Rear wheel hydraulic 160mm self-adjusting drum brakes. Mechanical hand operated park brake
Cargo Bed: Plywood 75 in x 41 in (191 x 105 cm). Lifts for access to powertrain.
Capacity: Seating for 2 persons
Dimensions
Overall Length
Overall Width
Overall Height (Steering Wheel) 47.5 in (120.6 cm)
Overall Height (Optional Cab)
Wheel Base
Front Wheel Track
Rear Wheel Track
Gnd Clearance @ Differential
Cargo Deck Width
Cargo Deck Length
Cargo Deck Load Height
Cargo Deck Material
Vehicle Power
Power Source
Motor Type
Horsepower (kW)
Electrical System
Batteries (Qty, Type)
Key or Pedal Start
Battery Charger
Speed Controller
Drive Train
Transaxle
Gear Selection
Rear Axle Ratio
Some items shown may be optional equipment
2 - 4
PRODUCT SPECIFICATION
CONFIGURATION HIGHLIGHTS
PRODUCT OVERVIEW
114.0 in (290 cm)
44.5 in (113 cm)
72.0 in (183 cm)
67.0 in (170 cm)
38.0 in (96.5 cm)
38.0 in (96.5 cm)
5.0 in (12.7 cm)
41.5 in (105 cm)
75.0 in (191 cm)
29.0 in (74 cm)
Heavy Duty Plywood
48 Volts DC
Shunt Wound
17.2 hp (12.8 kW) (Peak)
48 Volt
Eight, 6 Volt Deep Cycle, Swing Out Batteries
Pedal Start
48V On-Board, 120VAC UL R/C
Solid State 400 Amp Precision Drive System
Motor Shaft Direct Drive
Differential with Helical Gears
Dash Mounted Forward-Neutral-Reverse
14.9:1 (17:1 EE)
z
Output: 48 VDC at 18 amp. 14.5 amp @ 100 VAC
Performance
Capacity 2 Persons
Dry Weight 1208 lb (548 kg) (Without Batteries)
Curb Weight 1752 lb (795 kg)
Cargo Deck Load Capacity 2600 lb (1179 kg)/1600 lb(726 kg) EE
Vehicle load capacity 3000 lb (1361 kg) /2000 lb(907 kg) EE
Outside Clearance Circle 21.25 ft (6.47 m)
Intersecting Aisle Clearance 84.0 in (213 cm)
14 mph ± .5 (21 kph ± 0.8)
Speed (Level Ground)
10 mph ± .5 (16.1 kph ± 0.8)
Type EE
Vehicle Towing 5000 lb (2268 kg)/3000lb(1361 kg)EE
Steering & Suspension
Steering Rack and Pinion
Front Suspension Independent, Transverse Leaf Spring, Shocks
Rear Suspension Leaf Springs & Shock Absorbers
Service Brake Front Hydraulic Disc, Rear Hydraulic Drum
Parking Brake Hand Operated Mechanical
Front Tire 5.70 x 8 (Load Range C)
Rear Tires 5.70 x 8 (Load Range C)
Body & Chassis
Frame & Body Welded steel with DuraShield™ powder coat
Body & Finish Diamond plate ptn. Polyester primer + acrylic
Standard Color Yellow
Noise & Vibration
Noise Sound pressure; continued A-weighted equal to or less
than 70 db(A)
Vibration, WBV Highest RMS value of weighted acceleration is less than 2.5 m/s
Vibration, HAV
Highest RMS value of weighted acceleration is less than 2.5 m/s
The uncertainty of measurement is 0.12 m/s
Measurement methods were applied per the ISO 2631 and ISO 5349
standards under conditons of typical vehicle surfaces.
2
2