Web Monitoring Mode - Falcon DVR User Manual

4-channel digital video recorder

Hide thumbs

Table Of Contents

Table of Contents

User's Manual

NOTE: Do NOT close the LOGIN window during the WebGuard operation, otherwise, it will cause a script error when

switching between Web monitoring and Web search modes, and you will need to restart the WebGuard program.

NOTE: When running the updated WebGuard for the first time, Internet Explorer might occasionally load the

information of the previous version. In this case, delete the temporary internet files by selecting Tools  Internet

Options  General tab, and then run WebGuard again.

NOTE: There might be a problem that the bottom of WebGuard page is cropped due to the address or status

bars in Microsoft Internet Explorer 7.0. In this situation, it is recommended that websites open windows without

address or status bars by changing the internet setting. (Go to the Tools  Internet Options  Security tab 

Click the Custom level... button  Select Enable for the Allow websites to open windows without address or

status bars option)

NOTE: When running WebGuard in the Microsoft Windows Vista operating system, it is recommended to start

Internet Explorer with elevated administrator permissions. Click the right mouse button on the Internet Explorer

icon and select the Run as administrator option from the context menu. Otherwise, some functions of WebGuard

might be limited.

NOTE: There might be a problem with screen display or screen update due to low image transmission speed

when using the Microsoft Windows Vista operating system. In this situation, it is recommended you disable the

Auto Tuning capability of your computer.

Run the Command Prompt with elevated administrator permissions (Go to the Start Menu  Accessories 

Command Prompt  Click the right mouse button and select the Run as administrator option). Then enter

"netsh int tcp set global autotuninglevel=disable" and hit the enter key. Restart your computer to apply the

changes.

If you want to enable the Auto Tuning capability again, enter "netsh int tcp set global autotuninglevel=normal"

after running the Command Prompt with elevated administrator permissions. Restart your computer to apply

the changes.