Remote Control; Recording Setup; Record; Figure 36 ─ Vga Setup Screen - Falcon DVR User Manual

Figure 36 ─ VGA setup screen.
Highlight the box Test box and press the

Remote Control

Highlight Remote Control in the Devices menu and press the
you to select a port and make correct settings for a remote keyboard.
Figure 37 ─ Remote Control setup screen.

Recording Setup

Record

Highlight Record in the Record menu and press the
button to test how the screen will be displayed with the resolution you set.
Highlighting OK and pressing the
Figure 38 ─ Record menu.
Highlight the box beside Resolution and press the
You can select from 800x600, 1024x768 and 1280x1024.
Highlight Full Screen and press the
button toggles between On and Off. When it is On, the
screen on the VGA monitor displays in full screen mode.
button applies resolution changes.
button. The Remote Control setup screen allows
Highlight the box beside Port and select between None, RS232
and RS485. If the RS232 port and RS485 port is in use for
PTZ control, networking or text input, the remote keyboard
cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity,
Data Bits and Stop Bits for the device you are connecting to
the DVR.
Highlight the box beside Remote Control Product and select
the device from the list.
button. The Record setup screen appears.
4-Channel Digital Video Recorder
button. Pressing the
button.
29