Clip-Copy; Figure 68 ─ Clip-Copy Screen - Falcon DVR User Manual

Clip-Copy

Video clips can be copied on an external USB hard disk, CD-RW or flash drive. The copied video clips can be viewed
on computers running Microsoft Windows 98, ME, 2000, XP or Vista. Refer to the Appendix – USB Hard Disk Drive
Preparation for information on preparing the external drive for clip copy.
Press and hold the
Clip Copy
menu while in the Search mode, and the Clip-Copy screen appears to allow clip copy setup.
Pressing and holding the
mode initiates the One-Touch Clip Copy function. The last recorded image will be the ending point of video to be clip
copied, and the system will automatically begin to calculate the possible video data size that the selected storage media
can handle.
Selecting A-B Clip-Copy from the Export menu in the Search menu during playback will set the starting point of the
video to be clip copied, and the
again from the Export menu in the Search menu will set the ending point of the video to be clip copied by displaying
the Clip-Copy screen.
Figure 68 ─ Clip-Copy screen.
Highlight the box beside Dest. and press the
record the video clip. You can choose from USB Storage and USB CD-RW.
CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.
NOTE: While copying video clips on the CD-RW, the recording speed might decrease.
The DVR automatically assigns a file name to the video clip. However, you can give the video clip file a different name.
Highlight the box beside File Name and press the
video you are backing up and select Close. The DVR will automatically add the camera number (for example "01")
and ".exe" to the file name.
NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, ", <, >, |.
Highlight Include Text-In Data and press the
On, you can include text-in data when copying video if the video was recorded with text-in data.
Highlight Verify After Burning and press the
On, you can verify that the data is written on the CD-RW properly.
Once you have given the video clip a file name, highlight the Start button and press the
screen displaying data size will appear. When the storage device does not have enough space, the DVR will ask if you
want to copy as much of the video clip as possible in the available space.
Highlight the Continue button and press the
button for more than three seconds or select Clip-Copy from the Export menu in the Search
button for more than three seconds while in the Search mode or Live Monitoring
Clip Copy
icon displays at the bottom-left corner of the screen. Selecting A-B Clip-Copy
You can search video from the first to last recorded images, or you can
set the start and stop times and dates.
Highlight the box beside From and press the
specific Date and Time.
Highlight the box beside To and press the
and Time.
Highlight the box beside Channels and press the
select the cameras that you would like to include in your video clip.
Highlight the box beside Password and press the
keyboard appears allowing you to enter the password for reviewing the
video clips.
button. You can select the storage device on which you would like to
button. A virtual keyboard appears. Enter a file name for the
button. This will toggle between On and Off. When this feature is
button. This will toggle between On and Off. When this feature is
button to continue clip copy.
4-Channel Digital Video Recorder
(Enter) button to set a
button to set a specific Date
button. You can
button. A virtual
button. The confirmation
55