Shutdown - Falcon DVR User Manual

 Use DSL/PPPoE Setup: Selecting the box allows you to set up the DSL network. Entering the ID and password
for DSL connection is required.
NOTE: When the error message "No Device supporting UPnP" displays, check the NAT device supports the
UPnP Port Forwarding function and the function is set to enabled.

Shutdown

Highlight Shutdown in the System menu and press the
whether or not you want to shut the system down.
LAN Setup
Select between Auto Configuration and Manual
Configuration for network configuration, and then select the
Test button to test the network configuration you selected.
NOTE: Selecting Auto Configuration allows the DVR to
automatically obtain LAN parameters (IP address, Gateway,
Subnet Mask and DNS Server address). Selecting Manual
Configuration allows you to set up LAN parameters
manually.
NOTE: The network configuration you set should be tested
by selecting Test, otherwise the Next button will cannot
be selected, and you cannot move to the next step.
DVRNS Setup
 DVRNS Server: Enter the IP address or domain name
of the DVRNS server.
 Port: Set the port number of the DVRNS server.
 Enable NAT: Select the box to use the NAT (Network
Address Translation) device.
 DVR Name: Enter the DVR name to be registered on the
DVRNS server.
 Check: Select the box to check whether or not the name
you entered can be used.
NOTE: The DVR name you entered should be checked by
selecting Check, otherwise the DVRNS changes will not
be saved.
NOTE: When entering no name or a name already
registered on the DVRNS server, an error message displays.
Select the Finish button to finish the Setup Wizard.
button. The Shutdown screen displays asking you to confirm
4-Channel Digital Video Recorder
19