Using A Mouse; Figure 61 ─ Ptz Preset Screen - Falcon DVR User Manual

User's Manual
< Set Preset > < Move to Preset >
Figure 61 ─ PTZ Preset screen.
While in the PTZ mode, pressing the
displaying at the top of the screen displays the Advanced PTZ menu.
Set the feature you wish to control by selecting it from the menu. Refer to the camera manufacturer's
instructions for the proper settings. Depending on the camera specifications, some features may not
be supported.
You can use a mouse for convenient PTZ control. Position the mouse pointer at the bottom of the screen, and the
following PTZ toolbar will display.

Using a Mouse

You can use a mouse instead of the front panel buttons to perform many of the DVR functions. In the Live Monitoring
mode or Search mode, moving the mouse pointer to the left edge of the screen displays the following Mouse Display menu.
46
You can save camera position settings as "presets" so that you can go directly
to desired views.
Once you have the camera at the desired settings, press the
front panel. Select Set Preset from the Move to Preset dialog box, and the
PTZ Preset dialog box will appear. Select the number you want to assign to
the preset and press the
the preset name.
Press the
to Preset dialog box will appear. Select the desired preset and press the
button to load the preset.
Clicking on the left side exits the toolbar. If you want to display the toolbar again, position
the mouse pointer at the bottom of the screen. Change the toolbar location by clicking the empty
space on the left side of the toolbar and drag it to where you want it located on the screen. Use
the arrow buttons on the toolbar to pan or tilt the camera in the direction you want. The other
controls on the toolbar perform as described below:
Zoom In / Out
Iris Open / Close
(Enter) button. Use the virtual keyboard to enter
button on the front panel to load the PTZ preset, and the Move
button and selecting
Menu
Focus Near / Far
Set / Load Preset
button on the
(Advanced PTZ) in the menu