Event Status; Figure 58 ─ Event Status Setup Screen - Falcon DVR User Manual

Highlight the Notify box beside the desired event (System, Boot Up, Restart, Shutdown, Panic Record, Check
Recording, Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk Temperature, Disk S.M.A.R.T., Disk
Config Change or Fan Error), and press the
Notification and pressing the
button. Highlight OK and press the
pressing the
NOTE: Mail notify is the only option available for the System event.
NOTE: For the Notify action to work, the DVR should be registered in the RAS (Remote Administration System).

Event Status

Highlight Event Status in the Event menu and press the
Figure 58 ─ Event Status setup screen.
Disk Almost Full will be highlighted when the DVR is not in the Recycle mode and the level of disk usage reaches
the Disk Almost Full percentage you made in the System Event setup screen on the Event menu. Disk Full will be
highlighted when the DVR is not in the Recycle mode and all available storage space has been used. Disk Config
Change will be highlighted when the DVR reboots after the hard disk drive has been replaced.
Fan Error will be highlighted when the cooling fan to the left of the power cord on the rear panel is not working for
more than four seconds.
Highlighting the Storage tab will display the hard disk drive status. Refer to the Storage section for details.
button. You can toggle the entire list On and Off by highlighting
button. You can toggle the individual items On and Off by highlighting that item and
button to accept your changes.
button. The Event Status setup screen appears.
The Event Status screen displays the status of the DVR's
systems and inputs. Events will be highlighted, and related
channels or events will flicker for five seconds when detected.
Alarm-In, Motion, Video Loss, Video Blind and Text-In will
be highlighted when each event is detected based on the settings
you made in the Alarm-In, Motion Detection, Video Loss,
Video Blind and Text-In setup screen on the Event menu.
Check Alarm-In and Check Recording will be highlighted
when each event is detected based on the settings you made
in the System Event setup screen on the Event menu.
Panic Record will be highlighted while the DVR is in the
panic recording mode.
4-Channel Digital Video Recorder
41