Machine Initial; Machine Programming - Sanyo SFX-32 Service Manual

(5) MACHINE INITIAL
1. Connect AC plug into AC outlet.
126 Ott .'93 12:001
2. Press -] key while ~ key is being pressed and
keep this condition at least one second.
3. Press ~ .
4. Press ~ or -j.
B : Clear all items then return to STAND-BY display.
5.
6.
7.
At the same time S-RAM check is also carried out.
-1: Individual items.
Press ~ or [WI.
~ : Initialize RAM CODE and goes to the next item.
[m] : Just goes to the next item.
Press ~ or ~=~ .
~ : Clear one-touch and speed dial memory and goes
to the next item.
m] :Just goes to the next item.
Press ~ or -.
~ :~r Activity report data and return to
STAN13-BY
L 1
display.
-] : Just return to STAND-BY display.
REMARKS
In case of S-RAM Error at step 4,
alarm sounds continuously
and the machine goes into "DEAD LOCK' condition +
Repairing is required.
(6)
MACHINE PROGRAMMING
<SElllNG YOUR STATION NAME AND FAX NUMBER>
1.
2.
'L 3.
4.
5.
6.
7.
8.
9.
L
Press [-] 6 times.
Press ~ .
Press -] twice.
Press ~.
Enter your station name.
A maximum of 24 characters can be entered.
(See page 4)
Press ~ .
Enter your fax number.
Your fax number can be entered up to 20 digits in length.
Example 0123456
Press ~ .
Enter the PBX mode then press ~ .
Print an activity report (see page 35) to make sure that your
station name and fax number have been programmed
correctly.
—3—
I I
I
INITIAL SET ?
I
ALL CLEAR ?
J
126 Oct.'
93 12:001
RAM CODE CLEAR ?
O.T & S.D
CLEAR?
REPORT DATA CLR?
26
Oct. '93 12:00
IS RAM CHECK ERROR I
SET MODE ?
O.T DIAL SET ?
STATION CODE SET
I I
I
0123451
126 Oct.' 93 12:001