Sanyo SFX-32 Service Manual page 36

SW No. Setting items
setting No.
Contents
Fact. set
Explanation
75 Transmission start 00
2400 BPS
03 This is to set the training start speed of the
speed
01 4800 BPS MODEM.
02
7200 BPS
It is recommended that if Tx. error occurs
03
9600 BPS frequently set to 4800BPS.
76 TSI 00
None
01
This is to set the condition of transmitting TSI.
01
Transmit in
anycase
02
Transmit only
when CSI
receives
77 DCS timing 00
Response to the 00
This is to set the response of DCS corre-
first DIS
spending to DIS.
01
Response to the
In order to consider the influence of the echo
second DIS
while transmitting to overseas fax.
2nd DIS (SETTING No. 01) might be effective.
78
Interval between DCS 00
75 msec.
00
This is to set the interval between DCS and
and Training
01 0.3 sec.
training for the purpose of correcting the
02 0.5 sec.
mismatching of between Sanyo and other
manufacture's machine.
OCITT recommendation is 75 + 20 ms.
79 Interval between RTC
00
75 ms
00 This is to set the interval between RTC and Q
and Q
01
0.3 sec.
for the purpose of correcting the mismatching
02 0.5 sec.
of between Sanyo and other manufacture's
machine.
OCITT recommendation is 75 + 20 ms.
81 FSK release delay
00 0 ms
02
This is to set the delay for correcting the
01
100 ms
mismatching of between Sanyo and other
02
200 ms
manufacture's machine.
03 300 ms
04
400 ms
82 Transmission attenuator
00 0 dB
10
This is to set the transmission level attenuation
I I for control and video signals.
15 15dB
83
DTMF attenuator 00 0 dB 04 This is to set the transmission level attenuation
I
I
for Dual Tone Modulated Frequency (DTMF)
15 15dB dial.
84 Cable equalizer
00
OKm
01
An equalizer which adjust the characteristics
01
1.8Km
of the non-loaded cable between fax and
02 3.6Km exchange station. Set in response to the
03 5.6Km distance to the exchange,
88 Closed network
00 OFF 00 Even when select Reception is set reception is
communication Free
01
ON
free from any Sanyo fax machines at On.
pass Sanyo unit (SETTING
No.
01).
93 Paper precut
00
OFF 00
In case of ON, SFX-32 precut the recording
01
ON paper along the fold for reception and copy.
* In case of fixing the overseas transmission mode, set to SW No. 71 to 01, SW No. 78 and 79 to 01 or 02.
* The SW No. 60-93 are classified as follows.
60 and 61 : For testing purpose
66
: For checking the party's response
67-74
: Countermeasure for the reception problem
75-81 : Countermeasure for the transmission problem
82-84 : Countermeasure for the problem caused by line characteristics
88 and 93 : Others
—34-