Sanyo SFX-32 Service Manual page 10

I Cleaning the housing (exterior plastic parts)
Gently wipe the housing with a soft, clean cloth dampened with a small amount of a neutral detergent.
c Do not use a cleaning agent such as alcohol or benzene.
I Cleaning the document feed roller-2
I
If a streak or dirty pattern appears on a copy or a fax you have sent, clean
the document feed roller-2 with a soft, clean cloth dampened with a small
amount of neutral detergent.
n
1 & .pentheoperaticmpanel
'=00
:.::
.
! Cleanina the document feed roller-l
If the document jamming or overlapping frequently occurs, clean the docum
feed roller-1 with a cotton swab dampened with a small amount of a neu
detergent.
1
Open the operaffoh panel then pull
document release lever as shown in
figure.
2
2
In order to rotate the document feed
roller-2, press the document sensor as
shown in the figure.
3
3
Clean the document feed roller-2, then
dry it thoroughlyto prevant the document
from jamming.
In order to rotate the document f
roller-1, press the document sensor
shown in the figure.
Clean the document feed roller-1, t
dry them thoroughly to prevent
document from jamming.
Oparationpanel
— Rubber
sheet
roller-l
Document feed roller-2
JI
Document sensor -1