Installing The Pc Program - Nera WorldCommunicator Getting Started Manual

INSTALLING THE PC PROGRAM

The vtLite program allows the WorldCommunicator
functions to be operated or configured from a PC,
such as:
•
Phone book
•
Traffic log
•
Precharge
•
DECT/ISDN configuration
For an explanation of the functions, see the
Guide accessible on the enclosed CD.
The vtLite program is stored on the enclosed CD and must
be installed on the PC harddisk (Windows 95/98/NT).
Make sure no Acrobat program is opened on the PC:
1
Insert the CD :
The Start Page opens automatically in a few seconds.
(Alternatively, open the Acrobat file "NWC_StartPage" on
the CD. If necessary, install Acrobat Reader by clicking
"ar500enu" in the "SW Installation" folder.)
2
Click "Software Installation" and then "vtLite".
Allow files to load on to the PC harddisk.
The installation of the program starts automatically
when files have been loaded.
3
Connect the serial cable between the PC serial
port and the RS-232 port on the WorldCommunicator
Modem Unit.
4
Start the vtLite program by clicking
Start>Programs>WorldCommunicator>vtLite.
5
Turn ON the Modem Unit.
If no contact, click Mode>Terminal MMI.
If still no contact, click Configure>Port>Autodetect
46
User
GETTING STARTED
USB
ISDN
RS-232
Nera WorldCommunicator