Making A Call - Nera WorldCommunicator Getting Started Manual

SETTING UP '
CONT D

Making a call

Call through default Net service provider
When using the WorldCommunicator for the first
time in an Ocean Region, make sure that the region
appearing in the display is correct:
Unknown net
AOR-W
Ready for call
535
If incorrect, see "Selecting default Net
the previous page.
Dialing:
1
On the connected equipment, dial 00 and the
country code, followed by the subscriber number
(max 22 digits), and finally press
number, e.g.:
0 0 4 7 6 7 2
Note! Some types of equipment do not have # imple-
mented in software even if the #-key is on the keypad.
Then in front of the telephone number use:
903 if dialing the number digit by digit, or
902 if for the number to be sent as a block. e.g.:
9 0 2 0 0 4 7 6
2
Wait for answer.
3
Disconnect the call when finished.
28
09:46
provider" on
to send the
On DECT
also:
4 4 7 0 0
7 2 4 4 7 0 0
Internal communication
Calls can be made internally by dialing MSN numbers
between the connected ISDN and/or DECT equipment.
Examples:
ISDN-to-ISDN/DECT:
ISDN Handset/
DECT-to-ISDN:
DECT-to-DECT:
Note! If the telephone lacks the
instead, e.g.:
1 0 3 2
Transfer of incoming/outgoing satellite calls (with
above examples):
ISDN-to-ISDN/DECT:
R
R
Press button>1sec,
R appears in display:
R
DECT-to-ISDN:
R
DECT-to-DECT:
INT
INT
Nera WorldCommunicator
GETTING STARTED
MSN (example)
2 0
2 0
Handset Id (example)
INT 0 5
- key, 103 may be dialed
*
0
MSN/Handset Id
2 0
Hang up
toggles between subscribers
MSN/Handset Id
2 0
Hang up
toggles between subscribers
0 5
Hang up
toggles between subscribers