Installing The Pc Program - Nera WorldCommunicator Getting Started Manual

ADDITIONAL DEVICES

Installing the PC program

The vtLite program allows the WorldCommunicator
functions to be operated or configured from a PC,
such as:
•
Phone book
•
Traffic log
•
Precharge
•
DECT/ISDN configuration
For an explanation of the functions, see the
Guide accessible on the enclosed CD.
The vtLite program is stored on the enclosed CD and must
be installed on the PC harddisk (Windows 95/98/NT):
1
Insert the CD :
The Start Page opens automatically in a few seconds.
(Alternatively, open the Acrobat file "NWC_StartPage" on
the CD. If necessary, install Acrobat Reader by clicking
"ar405eng" in the "SW Installation" folder.)
2
Click "Software Installation" and then "vtLite".
Allow files to load on to the PC hard drive.
The installation of the program starts automatically
when files have been loaded.
3
Connect the serial cable between the
PC serial port and the RS-232 port on
the WorldCommunicator Modem Unit.
4
Start the vtLite program by
clicking Start>Programs>
WorldCommunicator>vtLite.
5
Turn ON the Modem Unit.
If no contact, click Mode>Terminal MMI.
If still no contact, restart the Modem Unit.
26
'
CONT D
User
GETTING STARTED
USB
ISDN
RS-232
PC serial port
Click to
open De-
vice Man-
ager for
configura-
tion of ISDN
and DECT
> > > > > >
Nera WorldCommunicator