Regulatory Information; Related Documentation - AudioCodes MediaPack MP-11 Series Installation Manual

Regulatory Information

The Regulatory Information can be viewed at http://www.audiocodes.com/downloads.

Related Documentation

SIP Product Reference Manual
SIP Release Notes
MP-11x & MP-124 SIP User's Manual
MP-124 AC SIP Fast Track Guide
MP-124 DC SIP Fast Track Guide
MP-11x SIP Fast Track Guide
CPE Configuration Guide for IP Voice Mail
Notes:
Note:
Do not open or disassemble this device. The device carries high voltage and
contact with internal components may expose you to electrical shock and
bodily harm.
Warning:
Warning:
Installation Manual
Document Name
Throughout this manual and unless otherwise specified, the following terms
are used:
•
Device refers to the MediaPack series gateways.
•
MediaPack refers to MP-112, MP-114, MP-118, and MP-124.
•
MP-11x refers to MP-112, MP-114, and MP-118.
The MP-11x and MP-124 devices are indoor units and therefore, must be
installed only indoors. However, the MP-124 FXS telephony cables can be
routed outdoors (MP-124 part numbers MP-124/24S/AC/OD and MP-
124/24S/DC/OD). Refer to Section
required when such outdoor cabling is implemented.
Caution Electrical Shock
The device is supplied as a sealed unit and must only be serviced by
qualified service personnel.
Disconnect the device from the mains and Telephone Network Voltage
(TNV) before servicing.
2.2.4.1 for surge protection means
8
MediaPack Series
Document #: LTRT-59813