Mounting Mp-11X; Figure 2-3: View Of Mp-11X Underside; Table 2-2: Mounting Components On Mp-11X Underside - AudioCodes MediaPack MP-11 Series Installation Manual

Installation Manual
4. Ensure that in addition to the MP-11x unit, the package contains the following items:
•
AC power cable.
•
Small plastic bag containing four anti-slide bumpers for desktop installation.
•
Regulatory Information document.
5. Check, retain, and process any documents.
6. Notify AudioCodes or your local supplier of any damage or discrepancies.
2.1.3

Mounting MP-11x

The device can be mounted in one of the following ways:
Desktop mounting (refer to 'Desktop Mounting' on page 13).
Wall mounting (refer to 'Wall Mounting' on page 14).
Standard 19-inch rack mounting (refer to '19-inch Rack Mounting' on page 14).
The figure below shows the mounting components on the underside of MP-11x:

Table 2-2: Mounting Components on MP-11x Underside

Item #
1 Square slot used to attach anti-slide bumpers (for desktop mounting).
2 Oval notch used to attach MP-11x to a wall.
3 Screw opening used to attach MP-11x to a 19-inch shelf rack.
Version 6.2

Figure 2-3: View of MP-11x Underside

Functionality
13
2. Installing the Device
February 2011