Installation Manual
2
Installing the Device
This section describes the MP-11x (refer to 'Installing the MP-11x Series' on page 11) and
MP-124 (refer to 'Installing MP-124' on page 20) hardware installation. This includes
physical description, unpacking the shipped package, and mounting and cabling
procedures.
2.1
Installing MP-11x
This subsection describes the MP-11x hardware installation.
2.1.1
Physical Description
The subsections below provide a physical description of the front and rear panels of the
MP-11x.
2.1.1.1
MP-11x Front Panel
The device's front panel provides LEDs for indicating various operating statuses. The figure
below displays the front panel of the MP-118. This is similar to the MP-114 and MP-112
models, differing only in the number of Channel Status LEDs (corresponding to the
number of channels). For a description of the device's LEDs, refer to 'Monitoring Front-
Panel LEDs' on page 55.
Version 6.2
Figure 2-1: MP-11x (e.g., MP-118) Front Panel
11
2. Installing the Device
February 2011