Led Status Indicator - COMPRO TN900R User Manual

TN900R/TN900RW - User' s Manual

LED Status Indicator

The LED status indicator comprises a blue LED and a red LED. When you turn on the power of IP camera, the
camera will start booting procedure. The IR LEDs and LED status indicator will be lit in the following patterns:
1. A few seconds after the IP camera powers on, the IR LEDs and LED status indicator becomes lit. The IR
LEDs appears red.
2. After about 5 more seconds, the IR LEDs turns off.
3. Attempting to connect: Establishing connection takes about 60 seconds. After the connection is estab-
lished, the blue LED will remain lit.
4. Connection established: LED status indicator remains lit in blue.
5. Connection failed: Blue LED light flashing on and off.
2-4 LED Status Indicator
Red LED
On On
Off On (turn off 0.5 sec. in
every 5 sec.)
Off On
On Off
Off Off
Blinking (every 0.5 sec.) Off
Off Blinking (every 0.5 sec.)
Off Blinking (every 0.2 sec.
in a 3-second period)
Blinking (every 0.5 sec.) Blinking
Blue LED
System booting up
Successfully established local network
connection
Successfully established internet network
connection
Performing hardware test
Powered off
Failed to connect to network / failed to
establish a WPS connection
Attempting to establish a WPS connection
Successfully established a WPS connection
Attempting to establish network connec-
tion
Table 2-1. LED status
Indication