Chapter 5: Live View; Page Layout - COMPRO TN900R User Manual

Chapter 5: Live View

Page Layout

On the first page, you can see the basic control panel at the top and on the left-hand side, and the live video
on the right-hand side. Click on the
Left control panel – Here provides control over video recording, voice communication, Pan/Tilt and
snapshot.
Video stream selection – You can switch between Stream-1 and Stream-2. (Stream-2 can be enabled
and configured in video settings.)
PTZ Speed – Set the Pan and Tilt speed from a scale of 1 to 10.
Video mode selection – Let you switch video display between single, multi, and auto scan mode.
Top control panel – Let you adjust camera video and microphone and speaker volume.
Preset Point – Changing the preset point allows you to change camera's current direction to a different
one to view in a pre-defined direction. (Please configure the preset points in [Setup] > [PTZ Control])
Magnifier icon – Click on the magnifier icon to bring up the digital zoom control window.
Live video panel – Live video stream. Click any spot on the video window to pan/tilt. You can switch to
full-screen mode by right-clicking on the video pane and select "Fullscreen".
Channel selector – Select a channel from the drop-down list, or click on the arrow icon to switch to
next/previous channel. Up to 16 cameras can be added to your channel list, and using the "Multiple" vid-
eo mode allows you to monitor 4 channels at the same time.
X-axis – Click on the bar to adjust camera's position on the x-axis.
icon to hide or show the control panels.
Figure 5-1. Layout of LiveView page for TN900
Chapter 5: Live View
Page Layout 5-1