Audio Detection; Temperature Detection; Recording Setup - COMPRO TN900R User Manual

TN900R/TN900RW - User' s Manual

Audio Detection

You can select the audio detection sensitivity level. Press [Save] button for the settings to take effect.

Temperature Detection

You can enable/disable the temperature detection feature, temperature scale and setup the low/high tem-
perature threshold to trigger events. Press [Save] button for the settings to take effect.

Recording Setup

In addition to the capability of storing event snapshots to local microSD Card slot (card not included), this
camera also supports storage of video clips (audio may be included if enabled) to the local storage device.
To configure the recording function, go to the main setup page and click [Recording Setup]. Then follow the
steps below.
1. Recording Setting: Here it displays the status of your SD card among other options. Click [Next] to pro-
ceed.
2. Event Selection: Click on [Next] to set up recording methods: "Event-based" or "Disable Recording. "
3. Event-based Recording: Start recording when motion, audio and I/O are triggered (multiple choic-
es). Recording length: 60~3,600 sec, default 60 sec.
4. Disable Recording: Turn off recording function.
Having made your settings, press [Save] button to save your settings. To play back the recordings stored on
the SD card, go to [Setup], and click on [Recording History] located on the left menu.
6-12 Recording Setup
SD Card Status
SD Card Capacity
Format
Enable Recording during
network failure
Figure 6-16. Motion detection
Status verification
Show available and total space in the card
Click to format SD card
Check to allow forced recording to SD card when network
connection fails
Table 6-4. SD card setup