Led Status Indicator - COMPRO IP55 User Manual

LED Status Indicator

When you power on the camera, it will start booting procedure. There are one blue LED and one red LED
inside the camera case. Depending on the booting status, the LED indicator will be lit in the followings way:
1. About 25 seconds after powering on the IP camera, both the blue LED and red LED indicator will
become lit (appears purple).
2. About 35 seconds after powering on the IP camera, the red LED will be turned off.
3. Camera trying to connect to network: both blue & red LED flashing at an interval of 0.5 second.
4. Camera established connection: blue LED constantly on (Red LED off )
5. Camera failed to connect: flashing red LED. (Blue LED off )
Red LED
On
Off
On
Off
Blinking (every 0.5 sec.)
Off
Off
Blinking (every 0.5 sec.)
Blue LED
On System booting up
On Successfully established network connection
Off Performing hardware test
Off Powered off
Failed to connect to network / failed to
Off
establish a WPS connection
Blinking (every 0.5 sec.) Attempting to establish a WPS connection
Blinking (every 0.2 sec.
Successfully established a WPS connection
in a 3-second period)
Blinking Attempting to establish network connection
Table 2-1. LED status
Figure 2-5. Normal connection
Chapter 2: Product Overview
Indication
LED Status Indicator 2-7