Stairville MH-X25 LED Spot User Manual page 22

Starting up
DMX indicator
Connections in master/slave
mode
22
If the device and the DMX controller are in operation, the DMX indicator shows an incoming
DMX signal at the input.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
moving head