Stairville MH-X25 LED Spot User Manual page 31

Tilt inversion
Display inversion
Operating mode 'DMX'
Repeatedly press [MODE/ESC] until the display shows 'tit' . Now use [UP] and [DOWN] to select
between 'rtit' (inverse direction of inclination) and 'tit' (normal direction of inclination).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
Repeatedly press [MODE/ESC] until the display shows 'diS' . Now use [UP] and [DOWN] to select
between 'rdis' (display text appears upside down) and 'dIS' (display text appears normal).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
Repeatedly press [MODE/ESC] until the display shows 'A-CH' . Now use [UP] and [DOWN] to
select one of the following DMX operating modes: 12 channel (display shows 'A-CH)' or 6
channel (display shows '6-CH' . This setting is only relevant if the device is controlled via DMX.
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
MH-X25 LED Spot
Operation
31