Stairville MH-X25 LED Spot User Manual page 36

Operation
Rotation preset (pan offset)
Inclination preset (tilt offset)
Gobo wheel preset
36
Activate the settings menu. Repeatedly press [MODE/ESC] until the display shows 'Pxxx' . Use
the [UP] / [DOWN] buttons to enter a value between 0 and 255, until the head is in the desired
home position.
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
Activate the settings menu. Repeatedly press [MODE/ESC] until the display shows 'txxx' . Use
the [UP] / [DOWN] buttons to enter a value between 0 and 255, until the head is in the desired
home position.
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
Activate the settings menu. Repeatedly press [MODE/ESC] until the display shows 'Gxxx' . Use
the [UP] / [DOWN] buttons to enter a value between 0 and 255, until the Gobo wheel is in the
desired home position.
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
moving head