Table of Contents
Advertisement
Section 2
ADDITIONAL CHECKS FOR TOP MOUNTED ICE
MAKER INSTALLATIONS
Location — Avoid placing the dispenser and/or
ice machine near heat sources such as
radiators, ovens, refrigeration equipment and
direct sunlight.
Clearances — Six inch (15.2 cm) clearance on
all sides of the icemaker is needed.
Front of icemaker to be flush with front of
dispenser — The front of the icemaker must be
flush with the front of the dispenser. When the
icemaker is flush with the front of the dispenser,
some icemakers may overhang at the back of
the dispenser.
Drains — A separate drain line is required for
the ice machine, in addition to a drain line for
the ice/beverage dispenser.
Dispensers require an adapter kit to install
some top-mounted icemakers. Contact your
local distributor for the correct adapter kit.
Part Number 020002115 10/11
Installation Instructions
2-3
Advertisement
Table of Contents
