Replacing consumables and maintenance unit
7
Align the image drum and arrow label
(red) of printer, slowly insert in the slot
taking care that your hand does not
1
touch the photoreceptor (green) below,
and firmly push it inside.
2
Note
z Be careful not to touch or scratch the image drum
(green cylinder).
8
Close the front cover.
Memo
z If Error709 appears after replacing the image drum,
refer to
"If replace consumables messages are
displayed"(P.38)
9
Please support recycling of the used
image drums.
Memo
z When disposing of the used image drums in
unavoidable circumstances, put it in a plastic bag,
and ensure to dispose according to the instructions
provided by the local municipality.
- 68 -
of this manual.