Superabrasive
Figure 9.6.10
Figure 9.6.13
Figure 9.6.16
Figure 9.6.19
Figure 9.6.22
Unlock bolts (Fig.9.6.10) and take more off (Fig.9.6.11). Unlock retaining shaft/bearing (Fig.9.6.12). Take away the filling ring
(Fig.9.6.13). Now the motor base disc is unlocked, the only way to dismount it is to press it out on a bearing press (Fig.9.6.14)
(Fig.9.6.15). Dismounting the driving pulley: take the top screw out to release the bushing (Fig.9.6.16), push the bushing together with
the washer up (Fig.9.6.17), push washer down of the bushing., take bushing out (Fig.9.6.18), push key out (Fig.9.6.19), now the washer
releases (Fig.9.6.20), dismount sealer cap (Fig.9.6.21), the pulley can be released with two crowbars; do not use excessive force
(Fig.9.6.22) (Fig.9.6.23), push the sealer cap to dismount (Fig.9.6.24), by mounting back the sealer cap, secure with sealant, center the
holes to mount the pulley.
.
Figure 9.6.25
User Manual
Figure 9.6.11
Figure 9.6.14
Figure 9.6.17
Figure 9.6.20
Figure 9.6.23
Figure 9.6.26
Original Language
Lavina® 20‐S
24
6/2013
Figure 9.6.12
Figure 9.6.15
Figure 9.6.18
Figure 9.6.21
Figure 9.6.24
Figure 9.6.27