Tensioning And Replace The Planetary Belt; Tensioning Used Planetary Belt; Mounting And Tensioning A New Planetary Belt - lavina 20-S User Manual

Superabrasive
9.3 TENSIONING AND REPLACE THE PLANETARY BELT
Figure 9.3.1
If the belt slips or is broken separate the carriage from main head, pull out motor plug (Fig. 9.3.1), water‐(Fig. 9.3.2) (Fig. 9.3.3)
and vacuum tubes. Take off handles, forks, and weight holders so you can dismount the top cover (Fig. 9.3.4) (Fig. 9.3.5)
9.4 TENSIONING USED PLANETARY BELT
Figure 9.4.1
Noticing speed lost in planetary movement it is possible to tension the belt for planetary movement as described in
9.5 Mounting and tensioning a new planetary belt.
9.5 MOUNTING AND TENSIONING A NEW PLANETARY BELT
Figure 9.5.1
Figure 9.5.4
Figure 9.5.7
User Manual
Figure 9.3.2
Figure 9.4.2
Figure 9.5.2
Figure 9.5.5
Figure 9.5.8
Original Language
Figure 9.3.3
22
Lavina® 20‐S
Figure 9.3.4
Figure 9.5.3
Figure 9.5.6
Figure 9.5.9
6/2013
Figure 9.3.5